802.1p queuing methods: SPQ, WRR, WFQ
Storm control: broadcast, multicast, unknown unicast (DLF)
Port-based rate limiting (ingress/egress)
802.3x flow control
802.1p Class of Service (SPQ, WFQ, SPQ/WFQ combination capable)
DiffServ (DSCP)

L2 Multicast
Static L2 Multicast Forwarding
IGMP snooping (v1,v2,v3)
IGMP snooping normal leave
IGMP snooping fast leave
Configurable IGMP snooping timer and priority
IGMP snooping statistics
IGMP throttling
IGMP filtering
IGMP querier mode
IGMP proxy mode & snooping mode selection

SNMP v1,v2c, v3
SNMP trap group
RMON (1,2,3,9)
ICMP echo/echo reply
Syslog
Display port utilization
IEEE 802.1AB LLDP
IEEE 802.1AB LLDP-MED
Custom default

Power-up mode selection
Scheduled PoE
Neighbor PD detection
Auto PD recovery
Continuous PoE
Extended range*
PoE consumption/classification modes
Port PoE Priority
Customizable maximum power per port
PoE Wide range detection
LLDP-Power via MDI
* Extended range excels long range installation but the actual performance may be effected by cabling quality or IP camera’s electrical design. We recommend users to test for IOP before physical deployment. Contact Zyxel for IP camera’s interoperability report.

IPv6 over Ethernet (RFC 2464)
IPv6 addressing architecture (RFC 4291)
Dual stack (RFC4213)
ICMPv6 (RFC4884)
Path MTU (RFC 1981)
Minimum Path MTU size of 1280 (RFC 5905)
Encapsulation for maximum PMTU size of 1500
Neighbor Discovery (RFC4861)

Web interface
Setup Wizard
Full managed CLI through Telnet/SSHv2
Management through Web, SNMP
Remote firmware upgrade by FTP/Web
Configuration saving and retrieving
Configure clone
DHCP client
DHCP relay per VLAN
Daylight saving
NTP (IPv4/IPv6)
Port mirroring
Restore to last custom default

Zyxel private common MIB
RFC 1066 TCP/IP-based MIB
RFC 1213, 1157 SNMPv2c/v3 MIB
RFC 1493 bridge MIB
RFC 1643 Ethernet MIB
RFC 1757 RMON group 1,2,3,9
RFC 2011, 2012, 2013 SNMPv2 MIB
RFC 2233 SMIv2 MIB
RFC 2358 Ethernet-like MIB
RFC 2674 bridge MIB extension
RFC 2819, 2925 Remote Management MIB
RFC 3621 Power Ethernet MIB
RFC 4293 Management Information Base (MIB) for IP
RFC 4292 IP forwarding table MIB
RFC 4022 management information base for transmission control protocol
RFC 4113 management information base for user datagram protocol

ZON Utility
Discovery of Zyxel switches, APs and gateways
Centralized and batch configurations:
IP configurationIP renew
Device factory reset
Device reboot
Device locating
Web GUI access
Password configuration
One-click quick association with Zyxel AP Configurator (ZAC)
Automatic detection of the latest firmware
Displays device serial number and hardware version
Cloud mode on/off option for Hybrid series devices
Smart Connect
Discover neighboring devices
One-click remote management access to the neighboring Zyxel devices
Reset neighboring devices remotely to factory defaults
Power cycle neighboring powered devices (PoE switches only)

EMC:
CE, FCC, C-Tick, Class ABSMI CNS13438
Safety:
LVD EN62368-1BSMI CNS14336-1
RoHS compliant

Ethernet port lightning surge protection
Power supply lightning surge protection
ESD(electrostatic discharge) protection
Extended range of up to 250 meters*
Fixed link speed at 10 MbpsLimited to 802.af PDs and cameras* Extended range excels long range installation but the actual performance may be effected by cabling quality or IP camera’s electrical design. We recommend users to test for IOP before physical deployment. Contact Zyxel for IP camera’s interoperability report.